Company Name:Pre-heated copper coil solar water heater

Model:CS-08GLZ-CC

Introduction:

Thermosiphon solar collectors provides mains pressure pre-heating via a high efficiency copper coil heat exchanger located within the solar collector tank.The way in which the Mains Pressure solar collector heats water is the same as the Non pressure solar collector.Rather than using the water in the tank directly,as the Non pressure does,the type uses a 45¡«60 copper coil heat exchanger inside the tank which provides more than 1.2m2 of heat transfer area.When water flows though the coil it absorbs heat from the water inside the solar collector tank.The solar collector tank is therefore a thermal store.One advantage of this system is that almost no water is introduced into the tank(apart from occasional topping up),so corrosion and scale buildup are almost totally eliminated.Tanks are designed for low to medium pressure applications using a gravity feed tank or pressure reduction valve.Direct connection to mains pressure water supply is not permitted.Please check your local building/plumbing regulations regarding the installation of water tanks.
 
1. TANK
 Outer tank material: High quality painted steel plate(white color) thickness 0.4mm;
 Inner tank material: SUS304-2B food grade stainless steel plate thickness 0.5mm;
 Heat preservation time: 72 Hours;
Superior heat preservation: high density polyurethane foam insulation layer thickness 55mm;
Copper coil: diameter 2mm, thickness 0.8mm.
Holes: 4 holes, water inlet and outlet, electrical heat element, vent.
2. Vacuum tube
Model: 58mm*1800mm,
double layer concentric borosilicate tempered 3.3 glass tube;
3.Bracket(Supporting frame)
 Angle:45 degree/30 degree;
 Material: galvanized plate spray plastic,thickness 1.2mm
 
Assistant water tank,electrical heating element,controller,reflector is optional.